JOINT – IT Simple – Grey – 20kg Tub
£37.50 per pack (excl.VAT)...which means £45.00 per pack, including VAT and Delivery!
Revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone.
Easy to apply – Simply brush in… and in all weather conditions too!
Rain or Shine – JOINT – IT Simple just goes in fine
Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and also clear of any dirt.
Pre-wet: Pre-wet area prior to spreading JOINT – IT
Pour Out: Open the lid of the container and pour JOINT – IT out immediately onto area.
Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted.
Add more water: Add more water sparingly to help JOINT – IT flow into joints of the paving….. working diagonally across the joints to ensure JOINT – IT has penetrated all joints of the paving.
Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT – IT residue is removed. Always sweep diagonally across joint.
Take care not to brush the product out of joints or into nearby drains. JOINT – IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT – IT will take longer to harden. Once bag is opened, contents must be used within 4 hours.
Approximate coverage using 4 size random paving per 20kg tub is 12.5m2 (*** all depends on joint width and depth!)